Cayan Setup Guide

August 28, 2023


This article covers the Cayan integration setup with Cayan MX925 terminal for Super Wrapper application.

Steps

  1. Open POS Application from start page and open Settings by pressing on the cog in upper-right corner
  2. Press payment configuration
  3. Press setup payment gateways
  4. Select “Native wrapper (IOS/Android)” as current integration
  5. Press open payment settings
  6. Settings page will be opened - Click select payment integration
  7. Select Cayan integration from the list
  8. Configure ”Device IP” field according to your Cayan terminal IP(NOTE: this field is not needed when using Cayan mini integration)
  9. Configure “Device Port” field according to your Cayan terminal port - default is 8443 (NOTE: this field is not needed when using Cayan mini integration)
  10. Configure “Merchant Key” field according to your Cayan merchant key
  11. Configure “Merchant Name” field according to your Cayan merchant name
  12. Configure “Merchant Site ID” field according to your Cayan merchant site ID
  13. Turn on secure connection
  14. Turn on “Use Cayan-mini Genius integration” if you are using Cayan mini
  15. Press “Test connection” in order to see if connection works - if connection is good you will see “Connection succeeded” on screen.

How to get ip from Cayan MX925 terminal?

  • Press “0” on Cayan MX925 terminal four times
  • “Admin” dialog should appear on screen, enter terminal password and press “Enter”(green circle)
  • IP address is visible on the screen