This article covers the Swedbank integration setup with the Ingenico terminal.
Steps
- Open POS Application from start page and open Settings by pressing on the cog in upper-right corner
- Press payment configuration
- Press setup payment gateways
- Select “Native wrapper (IOS/Android)” as current integration
- Press open payment settings
- Settings page will be opened - Click select payment integration
- Select Swedbank integration from the list
- Configure Terminal IP and terminal port to correct ones
- Default port is 4445
- Press “Test connection” if ip & port are configured
- “Connection succeeded” is shown in the app if connection is successful
How to get IP address from Swedbank terminal?
- Connect terminal to LAN
- Press following button on Terminal
If there is no such a button please press F button:
Press “1” on the Terminal (Option 1 - Tools)
Press “1” on the Terminal again (Option 1 - HW conf.)
IP is shown in the “IP:” section (the long number like xxx.xx.x.xxx)