In order to use Erply Berlin POS in Poland the following steps need to be taken:
-
Set-up and configure the PosNet fiscal printer
-
Change the required EPSI files
-
Install the Poland Printing plugin
Posnet fiscal printer TH230+ install step-by-step guide
1. Connect the printer via USB cable to PC
2. Download and install the driver:
https://www.posnet.com.pl/files/download/pos-h-dev-23-015-sterownik-usb-posnetcdc.zip
Download and install communication program for test print:
https://www.posnet.com.pl/files/download/posnet-grafik-1.02.zip
3. Check the configuration on your printer, which type of connection it actually uses.
For that go to settings using right arrow on the printer:
(2)Konfiguracja > (1)Parametry ogólne > (7)Funkcje komunik. > (1)Interfejs PC
Choose options using up/down arrows and OK is the right arrow.
USB Interfejs > POSNET Protokół > WINDOWS 1250 Strona kodowa
NB! If it gives some error with TCP/IP, you should check TCP/IP settings in the printer.
(2)Konfiguracja > (2)Konfig. Sprzetu > (8)TCP/IP > Interfejs Brak - if it's not like this,
change it using arrows. After that, you must choose option Zapisz ustawienia by
up/down. That will accept settings and reboot the printer. After reboot check 3 points in this
FAQ.
4. Open up the Device Manager in Windows PC and find which COM port printer is using.
5. Open Posnet Grafik program and choose right Interface, COM port and Baud Rate
settings (You can find them with “Print Self Test” from the service menu in the printer. To reach
service menu power off the printer and power on withholding feed button until it prints out
service menu options where you choose “Print Self Test” pushing two times feed button
and accept it withholding feed button for 5 sec)
Then on the bottom, you tick checkbox wydruk testowy and click on Ustaw. It must print
out the test page! (If it goes like this, you doing good)
6. Turn off EPSI if it's running
7. EPSI requires the jpos.xml file to be located in the %appdata%\ERPLY\Service directory.
You can do it yourself using for ex. Notepad. After text copied, Save as jpos.xml
NB! Example of the jpos.xml file at the end of the FAQ. Change COM port!
8. Start EPSI and log in.
9. Open Configuration > External device integrations and choose in printer option
posxml-device
In Fiscal settings choose PosNet
10. Restart web page and test.
<?xml version="1.0" encoding="UTF-8"?><!DOCTYPE JposEntries PUBLIC
"-//JavaPOS//DTD//EN" "jpos/res/jcl.dtd">
<JposEntries>
<JposEntry logicalName="fiscal-printer">
<creation factoryClass="com.posnet.jpos.services.PosnetServiceFactory"
serviceClass="com.posnet.jpos.services.FiscalPrinterService" />
<vendor name="POSNET" url="http://www.posnet.com" />
<jpos category="FiscalPrinter" version="1.13" />
<product
description="POSNET THERMAL HS FV EJ 1.03"
name="POSNET JavaPOS for Linux/Windows Version 1.9"
url="http://www.posnet.com" />
<prop name="deviceBus" type="String" value="USB" />
<prop name="portName" type="String" value="COM4" />
<prop name="baudRate" type="String" value="9600" />
<prop name="dataBits" type="String" value="8" />
<prop name="stopBits" type="String" value="1" />
<prop name="parity" type="String" value="0" />
<prop name="flowControl" type="String" value="0" />
</JposEntry>
</JposEntries>
EPSI change
-
Download posnet-fiscalization-1.3.0.jar, epsi3-3.25.14.jar and epsi-service-sdk-0.17.0.jar
-
Download and install the latest EPSI version
-
When the latest EPSI version is downloaded navigate to ERPLY -> Cache -> Service (for windows: %appdata% -> ERPLY -> Cache -> Service) to replace a file in EPSI
-
Locate the three files posnet-fiscalization-1.3.0.jar, epsi3-3.25.14.jar and epsi-service-sdk-0.17.0.jar and replace these with the new files
(This change has to be made in each device! And make sure that the PosNet file name is not manually altered for any reason!)
https://drive.google.com/open?id=11PBEOiCwA53nuRTVuSUvYN054OWuYmpO
Poland Printing plugin
In order to show the Card Payment details, MID, TID, and Tax Identification number field a plugin has to be installed on each Erply user account.
Plugin name: Poland Printing
Latest version: 1.3.7