Flax Standard POS Starter Guide

18. november 2026


Flax Standard POS Setup Guide

Nov 12, 2026 · @B-ERPLY

This guide takes a new user from a fresh ERPLY account to a working Flax Standard POS till and a first test sale, in seven steps.

On this page

  • Overview
  • Before you start
  • 1. Install the apps from the App Store
  • 2. Use the Set up checklist
  • 3. Build your POS menu
  • 4. Add staff and set permissions
  • 5. Install the till app on the device
  • 6. Describe the till and pair the device
  • 7. Sign in and make a test sale
  • Adding hardware
  • After setup
  • Messages you may see
  • FAQ
  • Support

Overview

Flax Standard POS is a point of sale for shops and restaurants. It runs on Windows, macOS, Linux, iPhone, iPad and Android, and is managed from your ERPLY account. This guide is for owners and managers setting it up for the first time.

There are two apps. Flax Standard POS is the till your staff sell on. Flax Standard Configurations is the back office where you set up everything the till shows: locations, products, menus, staff, tills and hardware.

PartWhat it doesUse it for
Flax Standard ConfigurationsBack office for the POSSetting up and running the POS from one place
Set up checklistLists what the till needs before it can sellWorking through setup in order and tracking what's done
Menus & tablesBuilds the button layouts staff tap at the tillProduct buttons, action keys, tabs and floor plans
PeopleUsers, PINs and user groupsWho can sign in, where, and what they may do
TillsRegisters and paired devicesCreating a till, pairing a device, updates
SettingsLocations, hardware, global settings, integrationsPrinters, payment terminals, taxes, receipts
OperationsLogs, documents and offline dataChecking sales, sync status and imports
Flax Standard POS (till app)The till itselfSelling, returns, cash in and out, opening and closing the day

Before you start

Have these ready.

  • An ERPLY account you can sign in to, with rights to install apps.
  • Your client code (account number). It's shown in the back office under your name, e.g. 553122.
  • At least one location and some products in ERPLY. You can import products later.
  • The device that will be the till: a Windows, macOS or Linux computer, an iPhone or iPad, or an Android device.
  • An internet connection on that device for install and pairing. After that the till keeps selling offline.

Tip: Use a test location and test products for your first run, so practice sales stay out of your real reports.

1. Install the apps from the App Store

Install Flax Standard Configurations first, then Flax Standard POS.

  1. Sign in to ERPLY. On the home screen, click App Store (or open Apps in the top menu).
  2. In Search, type flax standard. Two apps appear: Flax Standard POS and Flax Standard Configurations.
  3. Open Flax Standard Configurations and click Install. The screen shows Updating with a progress bar. Wait until it reaches 100% and says completed.
  4. Go back to the search results, open Flax Standard POS and click Install. Wait for 100% again.
  5. Both cards now show Up to date. On Flax Standard Configurations, click Open.

 

Tip: Tick Show Beta Applications if the apps don't appear in the search.

The Configurations page has extra modules you can add later, such as Flax Standard Restaurant, Flax Standard School and Flax Hospitality Configuration.

2. Use the Set up checklist

The Set up page lists everything the till needs before it can sell. Each item opens the page that does it, then brings you back. A green bar at the top of every setup page shows your progress, e.g. 5/5, with a Next button.

The checklist has three parts:

  • Needed before the till can sell: Locations, Products, POS menu, Staff, Tills.
  • Recommended: Receipt logo, shown at the top of printed and emailed receipts. Click Add a logo.
  • From your modules: extra steps, such as Floor plan & tables, appear when a module is turned on.

 

Locations

  1. Click Locations. Pick a store from the dropdown, e.g. Miami Flagship Store. Click Add location to create a new one.
  2. On the General tab, choose up to five Price lists. By default a later list overrides an earlier one for the same product.
  3. Under Assortment, leave None — sells every product, or pick an assortment to limit what this location sells.
  4. Check the POS behaviour, Receipt and Payments tabs, then click Save.

Products

Click Products to see your ERPLY catalogue. Products sync from ERPLY automatically. To bring in more, use Operations → Imports (see After setup).

Good to know

  • The setup mode is shown at the top of the checklist, e.g. User based: each person has their own till in every location. It's chosen when setup begins and cannot be changed afterwards.

3. Build your POS menu

The POS menu is the grid of buttons staff tap at the till. You need at least one saved menu before a till can sell.

Create the menu

  1. From the checklist, click POS menu. You land on Menus & tables → Menu, which lists any menus you already have.
  2. Click New menu. Type a Menu name, e.g. Main Menu.
  3. Optional: click Generate tabs from your catalogue to start with buttons already made.
  4. Click Create. The menu editor opens with one tab, Main.

Add buttons

  1. Click an empty cell in the grid. The Create button panel opens.
  2. Pick a Type:
  • Product — search for a product and select it. Tick Return product if the button should return it instead.
  • Action — a till function. The options are Open cash drawer, Search customer, Print, Print last sale, Select table, Search product, Scan, Card payment, Cash payment, Coupon, Manual promotion, Manual price list and VAT for this sale.
  • Row note — a heading that labels a row of buttons, e.g. Action Keys or Products.
  • Layout link — a button that opens another layout. Click Create child layout, name it (e.g. Clothing) and click Confirm.
  1. Optional: type a Label to replace the default name, and pick a Colour.
  2. Click Place, or Place & next to keep adding buttons.

Drag a button's corner to make it bigger. Click a layout link button to open its child layout and add buttons inside it; click Main in the path to go back.

Generate buttons from your catalogue

Instead of adding products one by one, click Generate buttons.

  1. Under From product groups & categories, choose one or more groups, e.g. Clothing.
  2. Leave Include sub-groups ticked. Tick Nest sub-groups as sub-layouts to give each sub-group its own layout.
  3. Under Place them, pick Current tab, New tab or Tab per group.
  4. Leave Row notes as Row note per group to label each group.
  5. Click Preview to check, then Generate. A message confirms what was added, e.g. Added 7 products and 1 row notes.

Buttons already on the target are skipped. A matrix product gets one button, and the till opens the variation picker.

Tabs and saving

  • Click Add tab to add a tab. Click a tab to rename it in the Rename tab box. Drag tabs to set the order they appear at the till.
  • Select several buttons to Move to tab, Recolour or Delete them together.
  • Click Save. Menu saved confirms it.

Tip: Put action keys like Open cash drawer and Search customer in their own row at the top, so staff find them in the same place on every tab.

4. Add staff and set permissions

Every person who sells needs a user with a PIN. What they may do comes from their user group.

Add a user

  1. From the checklist, click Staff. You land on People → Users.
  2. Click New user.
  3. Fill in Last name and Username (both required). First name, Email and Phone are optional.
  4. Type a PIN of 1 to 6 digits, or click Generate. Staff use this PIN to sign in at the till.
  5. Pick a Colour to tell users apart on the till.
  6. Under Access on the tills, choose the Locations this user can sign in at, then a User group.
  7. Optional: under Different group at some locations, give the user another group at a specific store. Leave Same as above everywhere else.
  8. Click Save.

 

Set what each group may do

Click User groups in the left menu. Your account may already have groups like these:

User groupMax. manual discountRights
Manager100%25 of 27
Shift lead20%18 of 27
Waiter0%9 of 27
Full access (locked)100%27 of 27

To change a group, click it. Set the Maximum manual discount (%), then set each right to Yes, Ask a manager or No, or switch it on or off. Rights are grouped under Manager approval, Money and discounts, Cash and day, Orders, Customers and settings and Viewing. Click Save. Click New user group to make your own.

Good to know

  • Users pick up group changes the next time they sign in.
  • Full access is locked and can't be edited.

5. Install the till app on the device

Do this on the computer or device that will be the till.

  1. From the checklist, click Tills. The Set up a till page opens. Section 1. Put the app on the device shows Flax Standard POS is installed on this account.
  2. Under Computers, click Windows, macOS or Linux – Intel or AMD to download the zip. For a phone or tablet, use iPhone and iPad (App Store) or Android (Google Play).
  3. Install it:
  • Windows: open the zip and run Flax Standard POS Setup. The app isn't signed yet, so Windows shows Windows protected your PC. Click More info → Run anyway, then Yes when asked to allow changes.
  • macOS: open the zip, then the disk image inside it, and drag the app onto Applications. Start it from there. The first time, macOS blocks it: go to System Settings → Privacy & Security → Open Anyway.
  • Linux (Ubuntu and Debian): open the zip and open the .deb file with the software centre, or run sudo apt install ./ followed by the file name.
  1. In the Windows installer, click Next. It installs Flax Standard POS, the Installer that runs the till's services, and the offline data service.
  2. On the Options screen, type your Client code. It's optional: if you leave it empty, the till asks for it when it first starts.
  3. Keep Start with Windows and Desktop shortcut ticked. Tick Kiosk mode (full screen) if the till should run full screen.
  4. Click Install, wait for Installation Complete, then close the installer. The till app opens on the Pair this device with a till screen.

Leave that screen open and go back to the browser for the next step.

6. Describe the till and pair the device

Describe the till

Back on Set up a till in the browser, scroll to 2. Describe the till. The device takes these settings when it pairs.

  1. Type a Name, e.g. Front Counter.
  2. Choose the Location where the till stands.
  3. Choose a Default printer if you have one (see Adding hardware).
  4. Choose the Menu template you built in step 3.
  5. Choose a Payment terminal, or External payment terminal if card payments run on a separate machine.
  6. Leave Track as The account's track (Stable).
  7. Print by default starts the till's receipt switch on, so every sale prints unless the cashier turns it off.
  8. Product row stacking adds a product already in the sale to its existing row instead of a new one. Rows with a discount or note stay apart.
  9. Click Save and make a code.

Pair the device

The Pair page shows a pairing code (e.g. YKRP-BZQC) and a QR code. The code is single use, valid for a limited time, and shown only once.

 

  1. On the till, on Pair this device with a till, type the pairing code, or scan the QR code with the device's camera. Click Continue.
  2. The till shows This device becomes with the till name, location, menu and update track. Check them and click Pair.
  3. The till downloads Flax Standard POS and checks the device. This takes a minute or two.
  4. In the browser, the page changes to Paired with a green Paired with … It took its settings and is ready to sell.

Tip: Lost the code, or it expired? Click New code. A new code replaces the old one.

7. Sign in and make a test sale

Sign in and open the day

  1. On Login with PIN, type the PIN you set in step 4 and tap Login. The till shows Starting… and Loading configuration….
  2. Pos Open Day asks for the Counted amount in the drawer. Type it, or tap the calculator icon to count notes and coins in the Cash Calculator.
  3. Tap the green button to open the day. The sale screen opens with your menu.


Make a sale

  1. Tap product buttons to add them. Tap a layout link (e.g. Clothing) to open it, and the back arrow to return.
  2. The sale appears on the right, with quantities, any promotions, Net total, VAT and Total.
  3. Use + and − on a row to change quantity.
  4. Tap the green To Pay button and take payment.

If you leave a sale without paying, the till asks This order has not been saved. Tap Save order to keep it, or Discard order.

Other things to try at the till

  • Orders: the list icon in the bottom bar shows open orders. Use Merge to combine them or Transfer to move one.
  • Returns: open the receipts list and tap Return next to a sale. Choose the refund method (Cash, Card or Store Credit), or tap Exchange to swap for other products.
  • Cash In / Out: record cash added or removed, with a reason, e.g. petty cash, float top ups, safe drops, Banking or Petty cash payments.
  • Close the day: shows Expected cash and Cash difference. Enter the counted cash, what goes To Bank and what's Left in register, then confirm. X Report prints the day's figures so far.

When your test sale goes through, setup is done. The checklist shows Everything the till needs is in place.

Adding hardware

Go to Settings → Hardware. It has four tabs: Printers, Kitchen displays, Payment terminals and Scales. Add the hardware here, then pick it on the till (see After setup).

TabClickFill inGood to know
PrintersAdd printerNickname, Vendor, Printer name with the model (e.g. Epson TM-T20III), ConnectionUSB needs no address. Network (TCP) needs the IP address. Bluetooth needs the MAC address.
Kitchen displaysAdd kitchen displayName, Location, Default printerKitchen screens need the Flax Kitchen Display module. Turn it on under Integrations.
Payment terminalsAdd terminalNickname, Provider, then the provider's own fields (e.g. merchant name, keys, device IP)Providers include Adyen, Adyen Tap to Pay, Cayan, Chase (JPMorgan), Moneris, Nets Connect@Cloud, PC-EFTPOS (Linkly), Shift4, Swedbank (Ingenico), Vantiv triPOS and Worldpay Hosted Payments (QR). The provider can't be changed after the terminal is created.
ScalesAdd scaleNickname, Model (e.g. CAS Type-5 — CAS PD-II), Port (e.g. COM3 on Windows)Computer tills only. Serial settings start at the model's factory values; change them only if the scale's own panel differs.

Click Save after each one.

After setup

Everything below is in the left menu of Flax Standard Configurations. Type in Find a page… to jump to any page.

Change a till

Go to Tills. The list shows each till's location, app version and whether it's up to date or Not paired. Click a till to change it:

  • Printing: default printer and Print by default.
  • Order displays: where this till sends kitchen orders.
  • Selling: menu template, payment terminal and Product row stacking.
  • Scale and ID card: pick a scale from Hardware. ID card readers are turned on in Settings → Customers.
  • Updates: leave Follow the account · Stable. Pick a track or a version only when this device must differ from the rest.
  • Device: shows the paired device's name, system, app version and pairing date. Use Make a pairing code to re-pair, or Unpair.

 

Click Save.

Catalogue and reference data

  • Catalogue: Products, Price lists, Assortments and Promotions (e.g. Buy X, get Y).
  • Classifiers: Product groups, Product categories, Brands, Matrix dimensions, Units, VAT rates, Customer groups and Reason codes (used for returns, discounts and write-offs).

Settings

Settings → Global settings holds company-wide POS defaults on these tabs: Company, POS defaults, Cash counting, Taxes, Loyalty, Search and Receipt logo. On Taxes, set the Default VAT rate for new products and the 0% rates for tax-free sales. Click Save.

Operations

PageWhat it showsUse it for
Activity logSync and system events, with statusSpotting a failed sync
Cart activityEvery change to a cart: who, which till, whatChecking what happened in a sale
FinalizationsSales sent on for invoicing, with statusConfirming sales reached ERPLY
Write-offA form to remove damaged or lost stockWriting off stock with a reason
Offline dataThe copies of data each till keeps, with limits and statusChecking tills have current data
ImportsProduct sync from ERPLY and spreadsheet importsBringing in products, matrix products, price lists, assortments and images

Good to know

  • Tills don't read the back office live. They read copies, so they keep selling offline. Offline data shows whether those copies are current.
  • On Offline data, each table's Actions has Sync now (pick up changes), Rebuild and Clear and refill. Use the last only if a table is wrong.
  • On Imports, Sync now pulls product changes from ERPLY. Nothing from a spreadsheet is written until you confirm.

Messages you may see

What you seeWhat it meansWhat to do
Windows protected your PCThe installer isn't signed yetClick More info → Run anyway
Do you want to allow this app from an unknown publisher to make changes to your device?Windows asks before installingClick Yes
macOS says the app can't be openedThe app isn't signed yetSystem Settings → Privacy & Security → Open Anyway
Please fill out this fieldA required field is emptyFill in every field marked Required
The pairing code doesn't workIt was already used, or it expiredOn the Pair page, click New code
A till shows Not paired in the Tills listNo device is paired to itOpen the till and click Make a pairing code
This order has not been savedYou left a sale without payingSave order to keep it, or Discard order
A red Failed row in Activity logA sync didn't finishCheck Offline data, then Sync now on that table
Product has not been added on the tillThe sale is emptyTap a product button to start a sale

FAQ

  • Does the till work without internet? Yes. Tills sell from local copies of your data and sync when the connection is back. Install and pairing need internet.
  • Can I change the till's menu later? Yes. Edit and save the menu, or pick another Menu template on the till under Tills.
  • Can one user work at several stores? Yes. Select several Locations on the user, and give a different user group per store if needed.
  • How do I move a till to a new computer? Install the app on the new computer, then open the till under Tills, click Make a pairing code and pair the new device.
  • Do I have to add products one by one? No. Use Generate buttons for the menu, and Operations → Imports to bring in products from ERPLY or a spreadsheet.
  • Where do I set the tax rate? Settings → Global settings → Taxes, and per rate under Classifiers → VAT rates.

Support

Questions or problems? Contact Support@us.erply.io or 518-855-6293