Adyen integration setup on Sunmi device

22. toukokuuta 2025

On this page

(Integration is available from 1.0.0 “Erply Point of Sale for Sunmi” version)

Supported Adyen terminals

  • S1F2L
  • S1F2
  • V400m
  • P400(series)

Supported Sunmi devices

  • Sunmi D2
  • Sunmi T2

Set up terminal and printing

  1. Log into the Wizard in browser with the Erply account used
  2. Select Hardware -> Integrations -> Warehouse tab
  3. Select the desired Warehouse
  4. Click on the ‘Payment Terminal’ button and Continue
  5. Add new integration - Adyen
  6. Enter Adyen API key 
  7. Click Save
  8. On a Sunmi device install the “Erply Point of Sale for Sunmi” application from Sunmi App Store.
  9. Login with Erply credentials.
  10. Navigate to the Settings -> Payment Configuration -> Setup payment gateways
  11. From “select current integration” select the “Native Wrapper (IOS/Android)”
  12. Click “Save”
  13. Click “Settings”
  14. Click on the “Payment Settings”
  15. Click on the “Get APIKEY” button - the API key will appear automatically
  16. In order to configure the terminal click “create”
  17. Select the terminal from the list
  18. Enter the following data:
    1. Terminal ID (check in Adyen portal ->In-person payments -> Terminals -> select terminal -> About this terminal)
    2. Terminal Key Identifier (should be provided by Erply or Adyen)
    3. Terminal Key Passphrase (should be provided by Erply or Adyen)
    4. Terminal Key Version: 0
    5. Terminal IP Address (check on the terminal)
    6. Request timeout: can be any (for example: 60)
    7. Connection type
    8. Region (Europe, Australia, US)
  19. Toggle the setting” Print from terminal Switch” if you would like to print a POS receipt from the terminal. Note: If a Sunmi built-in printer will be used instead please do not touch this setting!
  20.  Click “Save”
  21. Navigate to the POS Settings -> Printing Configuration
  22. Under Printing integrations select “Try printing by wrapper”
  23. Click “Save”

How to check additional information on the adyen terminal?

For v400m and p400Plus

  • To see the terminal’s information with the IP address, press 5 and then OK [5->OK].
  • To see Payment menu, press 8 and then OK [8->OK]. Enter PIN code.
  • To access the terminal’s Administrative menu, press 9 and then OK [9->OK]. Enter PIN code and press OK to continue [code->OK].
  • To access network, press 9 and then OK [9->OK]. Select Network and enter PIN code.

For S1F2 and S1F2L

  • To see the terminal’s information with the IP address, go to the Settings -> Device info.
  • To see Payment menu, go to the Transactions.
  • To access the terminal’s Administrative menu, go to the Settings -> Configuration. Enter PIN code and press OK to continue [code->OK].
  • To access network, go to the Settings -> Network. Select Network and enter PIN code.

Note: PIN codes to access transactions and configuration views can be found in Adyen portal -> In-person payments -> Terminals -> select terminal -> Passcodes.