Stock Take 2 User Guide
Oct 29, 2026
Video Demo: https://www.youtube.com/watch?v=EUPdS6Lv_Vo
Overview
Stock Take 2 lets staff count a store's stock on a handheld, phone or computer: pick a location, open a sheet, scan and count. Every count goes straight to the stocktaking in ERPLY, so the back office sees progress as it happens.
It is built for store managers and stock-count teams who need a count that is fast, keeps working when the Wi-Fi drops, and catches mistakes before they reach inventory.
| Part of the app | What it does | Use it for |
|---|---|---|
| Sheet list | Shows every stocktaking for the location, who is counting and its status | Picking up a count, seeing progress |
| New stocktaking | Creates a sheet for the whole location or chosen product groups | Full counts, spot counts of one department |
| Count screen | Scan or type a code, set the amount, tap Count | Counting shelves fast |
| Code index | A copy of the sheet's product codes kept on the device | Instant lookups and offline scanning |
| Error checks | Flags codes that don't match a product or aren't on the sheet | Catching bad scans before they count |
| Submit | Sends the finished sheet to ERPLY for review and confirmation | Updating inventory |
The app build is shown at the bottom of every screen (this guide covers build 75).
Getting started
Install Stock Take 2 from the ERPLY App Store, open it, and you land on the sheet list for your location.
Install. In the App Store, search for stock, tick Show Beta Applications, and open Stocktake 2. It runs in the browser, so it works on a handheld scanner, a phone or a computer.

Top bar. Shows the app name, the signed-in user, the account number and the current location. It also has a light/dark switch, Menu and Sign out. On the count screen it adds a connection indicator (online or checking…), Scan settings and Scanned.
Pick a location. The location name heads the page (e.g. Austin TX). Use Change location to count another store or warehouse.
The sheet list
Each row is one stocktaking for this location, the same ones you see in ERPLY under Inventory → Physical Stocktakings.
| Column | What it shows |
|---|---|
| Sheet | The stocktaking number, e.g. №321 |
| Name | The sheet name, who is counting right now (green dot), start date, who created it and how many rows it holds. Sheets made in the back office say created in Erply |
| Status | In progress, or closed |
| Actions | Open to count, Submit to finish |

Use Search (name or number) and the Status filter, then click Apply, to find a sheet.
Start a new count
- Click New stocktaking.
- Name: filled in for you as date, location and your name (e.g. 2026-10-29-Austin TX-Bruce Wayne). Change it if you like.
- Product groups: leave as The whole location for a full count, or tick groups (e.g. Cutlery, Cookware) for a spot count of one area. Use the search box to find groups.
- Which products go on the sheet: the default is Anything with stock, positive or negative.
- Click Create and start counting. The sheet is created in ERPLY and the count screen opens.

A sheet narrowed to product groups goes straight to building its code index (see Working offline and the code index), so it is ready to scan sooner.
Counting stock
Open a sheet, scan or type a code, set the amount and tap Count. Each count is sent to the sheet in ERPLY straight away, so the back office sees it in real time.
The count screen
- Back returns to the sheet list. The sheet number and name sit next to it.
- Status line (top right): scans, pieces counted, no-match codes and errors so far, e.g. Status: 8 scans · 8 pcs · 1 no match · 0 err.
- Code: scan with a handheld or type a barcode or product code. The camera button beside Count scans with the device camera.
- Amount: how many to add. It defaults to 1.
- Quick amounts: tap 1, 2, 3, 4, 5, 10, 25, 50 or 100 to set the amount in one touch. +1 and −1 nudge the amount up or down, so you can correct a miscount with a negative amount.
- Count: adds the amount to the product on the sheet.
What you see after each count
- The screen flashes green with the amount (e.g. +1) when the count is accepted.
- A line under the code box confirms it: +1 Benchmade Bugout Knife — 4 on the sheet.
- The product's running total for this sheet appears below the count box: code, product, quantity and who counted it.
- Recent scans lists every count you made, newest first, with code, product, quantity and the counter's name.

Counting as a team
Several people can count the same sheet at once from different devices. The sheet list shows who is counting each sheet right now, and every scan records who made it.
Tips
- For shelves with many of one item, count them, tap a quick amount or type the number, then scan once. It is faster than scanning each item.
- Watch the status line: a rising no match count means codes are being scanned that ERPLY doesn't know.
Working offline and the code index
The code index is a copy of the sheet's product codes kept on the device. With it, every scan is matched instantly on the device, and counting carries on when the connection drops.
Building the index
When you open a sheet, a blue banner shows Building the code index for this sheet with a progress bar. You don't have to wait: keep scanning, each scan goes to the server meanwhile, and the build carries on from where it left off. Nothing is lost and nothing needs rebuilding. Stop pauses the build.

When it finishes, the banner turns green: Code index ready on this device. The index is built from this stocktaking's own products, so it covers exactly what this sheet covers and nothing else.

Scanning without an index
If there is no index, a yellow banner says No code index for this sheet. You can:
- Build the index: start building it now (recommended).
- Scan without it: keep counting. It works, but every code is looked up on the server one at a time, and several codes crammed together in one field will not be found.
Connection and sync
- The top bar shows online (green) or checking… while the app confirms the connection.
- With the index on the device, scans keep matching while offline. Counts made on the device are listed under On this device until they reach ERPLY.
- Scanned in the top bar opens what has been scanned on this sheet.
Tips
- Build the index before you start a big count, ideally while still on good Wi-Fi.
- For a spot count, narrow the sheet to product groups. The index is smaller and builds faster.
Error checks
Stock Take 2 checks every scan as it happens and tells you at once when something is off, so mistakes are fixed on the shop floor instead of in the back office.
| What you see | What it means | What to do |
|---|---|---|
| Green flash, +1 Product — 4 on the sheet | Counted and matched | Carry on |
| Yellow line, +1 Product — counted, but it was not on this sheet | The product exists in ERPLY but wasn't on the sheet (e.g. it had no stock record, or is outside the chosen groups). It is still counted | Check it belongs in this location. It will show as surplus |
| Red screen, No product matches 67564354322342 | No product in ERPLY has this code. Often a mistyped or misread barcode | Re-scan or retype the code. If the product is real, add the barcode in ERPLY |
| Build a code index link on a no-match | No index on the device, so the code was only checked on the server | Build the index for faster, offline-proof checks |


No-match scans are kept under On this device, marked no match with the time of the scan, so nothing is quietly dropped. The status line counts them separately from real errors (1 no match · 0 err).
Tip: before submitting, glance at the status line. Zero no-match and zero errors means the sheet is clean.
Submitting and updating inventory
Submitting closes the count in ERPLY. Stock levels change only when the surplus is taken in and the shortfall written off in the back office.
Submit the sheet (in Stock Take 2)
- On the sheet list, click Submit on the sheet.
- Read the prompt: submitting closes the count. It can be reopened, but nothing further is counted into it from the app.
- Click Yes, submit (or Cancel). The row shows asking… while it is sent.
- A green banner confirms it, e.g. №322 submitted, and the sheet leaves the In progress list.

Update stock (in the ERPLY back office)
- Go to Inventory → Physical Stocktakings. The submitted sheet shows Confirmed on with the date, time and user.
- Where products were counted above stock, click Receive inventory. An Inventory Registration opens, filled in from the count: source Stocktaking act 322, location, creator and each product with its quantity.
- Check the reason code, date and rows, then click Confirm. The document gets a number (e.g. Inventory Registration no. 899) and the stocktaking row links to it.
- Where products were counted below stock, use Write off inventory the same way.


Good to know
- Sheets made in the ERPLY back office appear in the app too (created in Erply), and sheets made in the app appear in the back office. Both are the same stocktaking.
- Product counts on the sheet list (e.g. 460 rows) match the Products column in the back office.
Data and FAQ
Where the data comes from: products, codes, locations and stocktakings are read from and written to the ERPLY account. Nothing is imported or exported by hand.
FAQ
- Do I have to wait for the code index before scanning? No. Keep scanning while it builds; scans go to the server until the index is ready.
- Why does a product say "counted, but it was not on this sheet"? It exists in ERPLY but wasn't included when the sheet was made. The count is kept and shows as surplus.
- Why "No product matches"? No product in ERPLY has that code. Re-scan, or add the barcode to the product in ERPLY.
- Can two people count the same sheet? Yes. Each scan records who made it, and the sheet list shows who is counting.
- I made a mistake. How do I fix it? Count the same product again with a negative amount (tap −1 or type a negative number).
- Does submitting change my stock? No. It closes the count. Stock changes when you confirm Receive inventory or Write off inventory in the back office.
- Can I reopen a submitted sheet? It can be reopened, but nothing further is counted into it from the app.
Beta note: Stock Take 2 is in beta. Report anything that looks wrong to support@erply.com or +1 (518) 855-6293.
keywords: Stoctaking, physical stoctaking, cycle counts, counts, inventory counting