Kassaga ühilduv riistvara

25. oktoober 2024

On this page

Which operating system to choose?

Operating system choice will set the path of all the hardware choices you need to make in order to get a working solution specific to your need. We support all the major operating system with a good range of latest versions. See the full list here:

Windows 8

Windows 8.1

Windows 10

Ubuntu 18.xx

Ubuntu 20.xx

Since 6.0 Since iOS 11

Since Yosemite

What hardware options do we have?

Erply supports a wide range of hardware, from the most common to very specific and detailed solutions. This is point of sale hardware that we have integrated and know will provide seamless day-to-day work:

  • Printers
  • Scanners
  • Cashdrawers
  • Customer Displays
  • Card Terminals
  • Fiscals
  • Scales
  • POS Computers

Printers

PRODUCEREXACT MODELPICTURESETUPOS SUPPORT
Star MicronicsmC-Print2 (MCP21LB BK)
  1. For Windows/Linux, plug in power cable. 
  2. Plug in USB to PC. 
  3. Make sure the printer is displayed under PC's printers. 
  4. Go to the Wizard -> Integrations -> POS -> Printer
  5. Choose printer from the list ("Get full printer list" should be checked). 
  6. In the POS -> Printing configuration, check the "Try printing using the go microservice".
Works on Windows, Linux, iOS, Android. For Bluetooth connection use Erply Wiki guide -> https://wiki.erply.com/article/1678-printer-setup-guide 
TSP100III (TSP143III-LAN)
  1. For Windows/Linux, plug in power cable.
  2. Plug in USB to PC.
  3. Make sure the printer is displayed under PC's printers.
  4. Go to the Wizard -> Integrations -> POS -> Printer
  5. Choose printer from the list ("Get full printer list" should be checked).
  6. In the POS -> Printing configuration, check the "Try printing using the go microservice".
Works for iOS and Android. For Bluetooth connection use Erply Wiki guide (use LAN connection, printer name: TSP143III-LAN)
TSP650 (TSP654--STR_T-001-)
  1. For Windows/Linux, plug in power cable.
  2. Plug in USB to PC.
  3. Make sure the printer is displayed under PC's printers.
  4. Go to the Wizard -> Integrations -> POS -> Printer
  5. Choose printer from the list ("Get full printer list" should be checked).
  6. In the POS -> Printing configuration, check the "Try printing using the go microservice".
Works only on Windows and Linux.
SM-L300

Works via Bluetooth, no need to connect in the tablet settings. 

  1. Go to POS -> Settings -> Printing configuration. 
  2. Check the "Try printing by wrapper".
  3. Open printing settings -> Check that printer connection is Bluetooth -> Search Printers. 
  4. Correct printer is Star-SM-L300.
  5. Close and save Printing settings.
Works on iOS. Use application called ERPLY - Point of Sale. Can be downloaded here.
EpsonTM-T20III
  1. For Windows/Linux, plug in power cable.
  2. Plug in USB to PC.
  3. Make sure the printer is displayed under PC's printers.
  4. Go to the Wizard -> Integrations -> POS -> Printer
  5. Choose printer from the list ("Get full printer list" should be checked).
  6. In the POS -> Printing configuration, check the "Try printing using the go microservice".
  7. Setup guide -> https://wiki.erply.com/article/1036-go-microservice-printing-setup-brazil 
Works only on Windows and Linux.
TM-m30
  1. For Windows/Linux, plug in power cable.
  2. Plug in USB to PC.
  3. Make sure the printer is displayed under PC's printers.
  4. Go to the Wizard -> Integrations -> POS -> Printer
  5. Choose printer from the list ("Get full printer list" should be checked).
  6. In the POS -> Printing configuration, check the "Try printing using the go microservice".
  7. Setup guide -> https://wiki.erply.com/article/1036-go-microservice-printing-setup-brazil 
Works on Windows, Linux and Android. For Android use POS Super wrapper application and LAN connection.
TM-T88IV
  1. For Windows/Linux, plug in power cable.
  2. Plug in USB to PC.
  3. Make sure the printer is displayed under PC's printers.
  4. Go to the Wizard -> Integrations -> POS -> Printer
  5. Choose printer from the list ("Get full printer list" should be checked).
  6. In the POS -> Printing configuration, check the "Try printing using the go microservice".
  7. Setup guide -> https://wiki.erply.com/article/1036-go-microservice-printing-setup-brazil

Check this guide to configure on Linux: https://www.usb-drivers.org/usb-serial-port-adapter-rs-232-in-ubuntu-linux.html 

Works for Windows.

CitizenCT-S651
  1. For Windows/Linux, plug in power cable. 
  2. Plug in USB to PC. 
  3. Make sure the printer is displayed under PC's printers. 
  4. In the Wizard - make sure the printing microservice is installed.
  5. In the Wizard -> Hardware -> Integrations -> select POS -> Printer 
  6. Choose CT-S651 ("Get full printer list" should be checked). 
  7. In the POS -> Settings -> Printing configuration
  8. Check that "Try printing using the go microservice" is checked.
 
Diebold NixdorfTH250

Has a special USB power cable. Once plugged in configure through Wizard and POS.

  1. Make sure the printer is displayed under PC's printers. 
  2. In the Wizard - make sure the printing microservice is installed.
  3. In the Wizard -> Hardware -> Integrations -> select POS -> Printer 
  4. Choose CT-S651 ("Get full printer list" should be checked). 
  5. In the POS -> Settings -> Printing configuration
  6. Check that "Try printing using the go microservice" is checked.
Works on Windows, requires a PC with special USB power port.
Partner TechRP-330

Works on Windows/Linux.

  1. Plug in power cable. 
  2. Plug in USB to PC. 
  3. Make sure the printer is displayed under PC's printers. 
  4. In the Wizard - make sure the printing microservice is installed.
  5. In the Wizard -> Hardware -> Integrations -> select POS -> Printer 
  6. Choose RP-330 ("Get full printer list" should be checked). 
  7. In the POS, under Printing configuration, check that "Try printing using the go microservice" is checked. 
  8. Characters per line 42. 
  9. Important: If the printer name is not RP-330, the printer needs to be renamed in the computer's device settings to have “RP-330”.
Works on Windows and Linux. 

Scanners

PRODUCEREXACT MODELPICTURESETUPOS SUPPORT
NewlandNLS-HR22
Plug in scanner. Set up a barcode with barcode generator. Open POS. Open product search on POS and scan.Doesn't work for iOS. Works on Windows, Linux and Android.
Star MicronicsBCR-POP1
Needs to be connected to mPOP.Works through mPOP. Just plug in under the mPOP unit and check scanner connection through Star Quick Setup Utility app.
SunmiNS021
Plug in scanner. Set up a barcode with barcode generator. Open POS. Open product search on POS and scan.Doesn't work for iOS. Works on Windows, Linux and Android.
DatalogicQW2120-BK
Plug in scanner. Set up a barcode with barcode generator. Open POS. Open product search on POS and scan.Doesn't work for iOS. Works on Windows, Linux and Android.
ZebraDS2278
  
Magellan8300/9300i
  

Customer Displays

PRODUCEREXACT MODELPICTURESETUPOS SUPPORT
Glancetron/Jarltech8035 series
https://wiki.erply.com/article/1107-glancetron-8035-8036-hp-lm940 
Has 2 USBs, both need to be plugged in. Install driver from link under required drivers. In the wizard check that the microservice is installed and running and check the device name. Make sure that all the credentials are correct.		Works on Windows after installing the driver. For the Linux, in order to find port name, enter ls -l /dev/tty* in the Linux terminal window. Example of what should be added under port name in Wizard looks like this: /dev/ttyUSB0. Make sure all the other credentials are correct. Baud rate: 9600.
8036 series
https://wiki.erply.com/article/1107-glancetron-8035-8036-hp-lm940 
Plug in USB. In the wizard check that the microservice is installed and running and check the device name. Make sure that all the credentials are correct.		Works on Windows and Linux. To find port name, use the same method as above. Baud rate 19200.
HPLM940
  
ClientronPM1000
  
Partner TechCD-7220-UN-G
 Works on Windows and LInux. Requires Microservice of external devices.

Scales

PRODUCEREXACT MODELPICTURESETUPOS SUPPORT
Kern & SohnKIB-TM
https://wiki.erply.com/article/2084-kern-sohn-kib-tm-setup-with-brazil-pos?searchRedirect=true  
SunmiS2

 https://wiki.erply.com/article/2153-how-to-activate-the-customer-display-app-on-secondary-display-for-sunmi-devices?searchRedirect=true 

Plug in power cable. Turn on. Control through Android screen. Open Erply Point of Sale application

Doesn't apply, it's a multifunctional system consisting of Android tablet, scale and a customer display.
OHAUSRanger 3000
https://wiki.erply.com/article/2083-ohaus-ranger-3000-setup-with-brazil-pos?searchRedirect=true  
CASPD-II
Type-5 scales setup guide can be found here. 
CASER Jr
Type-6 scales setup guide can be found here. 
CASPD PLUS PDi 15
Type-6 scales setup guide can be found here. 
DibalDPOS-400
Dibal scales are using NCI-ECR protocol. Setup guide can be found here. 
DibalG serie
Dibal scales are using NCI-ECR protocol. Setup guide can be found here. 

Cash Drawers

PRODUCEREXACT MODELPICTURESETUPOS SUPPORT
Star MicronicsmPOP
https://wiki.erply.com/article/565-star-mpop-printer-ipad 

Plug in mPOP. Connect via Bluetooth to iPad. Check iPad settings according to Erply Wiki article. Use Star Quick Setup Utility application in order check that mPOP is connected. Use POS Super Wrapper app. Set up through printing configuration --> Bluetooth connection --> Printer name STAR-POP10 WHT		Tested and works on iOS/Android.
Any24V Cash Drawer
https://wiki.erply.com/article/128-set-up-a-cash-drawer  

Card Terminals

PRODUCEREXACT MODELPICTURESETUPRELATED MICROSERVICE
Verifonee285 (Genius)
https://help.globalpaymentsintegrated.com/1/payment-devices/genius/e285/how-do-i-set-up-my-genius-e285/ Cayan
V400M
https://wiki.erply.com/article/1238-adyen-integration-pos-setup 

Plug in power cable and connect with Ethernet cable.		Adyen
MX915 (Cayan) G1 & G2
https://wiki.erply.com/article/1887-cayan 

Plug in power cable and connect with Ethernet cable.		Cayan
MX925 (Tripos)
 Tripos
M400 (Cayan)
https://wiki.erply.com/article/1887-cayan  
Plug in power cable and connect with Ethernet cable.		Cayan
P400 Plus
https://wiki.erply.com/article/1238-adyen-integration-pos-setup 
Plug in power cable and connect with Ethernet cable.		Moneris & Adyen (depends on the terminal)
TSYSGenius mini
https://wiki.erply.com/article/529-genius-mini 
Bluetooth 		/
IngenicoMove/3500
https://wiki.erply.com/article/1099-estonia-ingenico-terminals 
Plug in power cable and connect with Ethernet cable.		Swedbank-ingenico (depends on the terminal)
Move/3500 & iPP 315
//
Desk/3200 & Desk/1500
https://wiki.erply.com/article/1099-estonia-ingenico-terminals 
Plug in power cable and connect with Ethernet cable.		Swedbank-ingenico
Desk/5000
Plug in power cable and connect with Ethernet cable.Chase
Lane/3000
/Shift4/Chase
Lane/5000
//
iCT220 & iPP 310
https://wiki.erply.com/article/1099-estonia-ingenico-terminals 
Plug in power cable and connect with Ethernet cable.		Swedbank-ingenico
iPP 320
In order to use iPP 320, OpenEdge RCM software is needed. The app is used to connect the terminal to the PC. Plug in USB to the PC and configure through the RCM software.TSYSCanada
iSC Touch 250
See Integration credentials Google Docs for exact steps to setupTripos
PaxS300
https://wiki.erply.com/article/1889-pax-heartland-pos-web-app-setup 
Plug in power cable and connect with Ethernet cable.		PAX Heartland
A35
https://wiki.erply.com/article/1889-pax-heartland-pos-web-app-setup 
Plug in power cable and connect with Ethernet cable.		PAX Heartland
A80
https://wiki.erply.com/article/1889-pax-heartland-pos-web-app-setup PAX Heartland
A930
//
A920
//
A920 Pro
//
E600 Mini
//
D210
https://wiki.erply.com/article/526-pax-d210-wifi-setup /
WorldlineYomani XR
Plug in USB cable to PC and connect with Ethernet cable.Verifone
EloM60
//

Fiscal Devices

Posnet-Poland