Opening & Closing the Day
Process guide | Updated November 2026
Overview
Counting the opening float, Cash In / Cash Out, the X-Report, mid-day reconciliation, correcting payment errors, and closing the day with the Z-Report.
In this guide
- Opening the Day
- Cash In and Cash Out
- X-Report vs Z-Report
- Running the X-Report
- Mid-Day Till Count
- Card Payment Reconciliation
- Correcting a Payment-Type Error
- Closing the Day
- Related Setup
Reading the screenshots
Tip: If an image is hard to read, zoom in on your screen (Ctrl and +). Red boxes and numbers in screenshots mark the parts of the screen described in the steps.
Opening the Day
Count and enter the float
The Open Day screen appears when you open a register whose day has not been opened yet. The opening float is the cash left in the drawer at the end of the previous day.
- Open the cash drawer and count every bill and coin.
- Enter the quantity of each denomination under Bills and Coins. Enter how many of each, not the dollar value.
- Check that Counted Cash on the right matches the expected float for your store.
- Select Open Day. The sales screen opens and you can start selling.

Open Day: (1) enter the denomination counts, (2) the total is calculated automatically

A $200.00 float entered, ready to open the day
Important: Triple-check the counts before selecting Open Day. The opening amount is used to calculate the expected cash at the end of the day.
Cash In and Cash Out
Record a cash movement
Use Cash Operations to record cash added to or removed from the drawer when it is not part of a sale, such as a mid-day cash drop to the safe, petty cash for supplies, or extra change brought into the till.
- Select More, then Cash Operations.
- Choose the Cash In or Cash Out tab.
- Enter the Amount, select a Reason, and add Notes (for example what was purchased or who took the drop).
- Select Cash In or Cash Out to save. Select Cancel to leave without saving.

More menu

Cash Operations: Cash In

Cash Operations: Cash Out
Note: Cash In / Cash Out amounts are included in Day income with cash in/out and Expected amount in drawer on the X-Report and Z-Report. Always record cash movements so the drawer balances at close.
X-Report vs Z-Report
Comparison
| X-Report | Z-Report | |
|---|---|---|
| Purpose | Mid-day check. Examine sales and the drawer while the day is open. | End-of-day closing report for the register. |
| When | Any time, as often as needed (shift change, mid-day, before closing). | Once, when you close the day. |
| Resets totals? | No | Yes. The next day starts a new period. |
| Shows | Payments by type, transactions, opening float, day income, expected cash. | Everything on the X-Report plus counted cash, deposit, amount left in the drawer and over/short. |
An easy way to remember: X = eXamine, Z = Zero out.
Running the X-Report
Open the report
- Select Functions (scroll down in the button panel), then X-Report.
- Review the report. Payments are grouped by type (cash, card types, gift card, credit invoice, and so on), with each receipt listed.
- Use Print, Print PDF or Download PDF to keep a copy.
- Select the X or Back to return to the sales screen.

Functions: X-Report

X-Report header and print options
Register summary
The register summary at the bottom of the report shows the cash position of the drawer:
- Initial amount in drawer: the opening float
- Day income: cash received from sales, less cash refunds
- Day income with cash in/out: day income plus or minus Cash In / Cash Out
- Expected amount in drawer: the cash that should be in the drawer now

X-Report register summary
Mid-Day Till Count
Count and compare
Counting the drawer during the day makes it easier to find a mistake while the transactions are still fresh.
- Run the X-Report and note the Expected amount in drawer.
- Count all cash in the drawer. Check under the cash tray for large bills.
- Compare your count with the expected amount. If they match, there is no cash variance.
- If they don't match, review the cash transactions on the X-Report for a wrong amount, wrong change or wrong payment type.
Important: Do not use the Close Day screen as a counting tool. Close Day is a blind count (it does not show the expected amount), and selecting Close Day there closes the register immediately.
Card Payment Reconciliation
Integrated terminals
With an integrated terminal, card payments are sent from the terminal to the POS automatically, so card totals do not normally need manual reconciliation. Only the cash needs counting. If card totals on the X-Report don't match the terminal, contact ERPLY Support.
Non-integrated (standalone/external) terminals
With a standalone terminal, staff select the card type in the POS by hand, so card totals can be mis-keyed.
- Print a mid-day or batch report from the terminal (without closing the terminal batch, if possible).
- Compare each card type (Visa, Mastercard, debit, and so on) with the totals for the same card types on the X-Report.
- If a card type is over and another is under by the same amount, a payment was recorded under the wrong type. Correct it as shown below.
- If your store uses a reconciliation spreadsheet, enter the terminal receipts and the POS totals to find the variance.
Correcting a Payment-Type Error
Return and re-ring the sale
When a sale was recorded with the wrong payment type (for example, paid by Amex but recorded as Visa), return it to the wrong payment type and ring it again with the correct one.
- Find the receipt in Recent Sales (search by invoice number, date or card last 4 digits).
- Return the full sale with a reason code (see guide 05 Returns, Exchanges & Store Credit), and refund it to the wrong payment type that was originally recorded.
- Ring the same items again and take payment with the correct payment type. Do not run the card on the terminal again. Record the payment type only.
- Run the X-Report again to confirm the card totals now match.
Note: Cash variances are usually caused by giving incorrect change or entering the wrong cash amount. A recorded Cash In or Cash Out that didn't happen (or the reverse) can also cause one.
Closing the Day
Before you close
- Make sure all suspended sales in Open Sales are completed or deleted.
- Run a final X-Report and confirm there are no card variances.
- Pull any daily sales reports your store needs from Backoffice.
Close Day
- Select More, then Close Day.
- Count all cash in the drawer and enter the quantity of each bill and coin. Counted fills in automatically.
- In Left as change, enter the float to leave in the drawer for tomorrow.
- Deposited is calculated automatically (Counted minus Left as change). This is the amount for the deposit bag.
- Enter a Note (required), for example who closed and any comments about the day.
- If there is a variance and variance reasons are set up, select a Variance Reason.
- Select Close Day.

Close Day: (1) count by denomination, (2) amounts and note

Close Day completed: (1) Counted, (2) Left as change, (3) Deposited, (4) Note, (5) Close Day
Important: The register closes as soon as you select Close Day. There is no confirmation screen. Check the counts and the float amount first.
The Z-Report
After the day is closed, the Z-Report opens. Use Print, Print PDF or Download PDF to keep a copy with your end-of-day paperwork.

Z-Report
Check the closing section at the bottom of the register summary:
- Total counted in drawer: the cash you counted
- Deposited: the amount to remove for the deposit
- Left to drawer: the float for the next day
- Over/Short: the difference between counted and expected cash. 0.00 means the drawer balanced.

Z-Report closing summary
After closing
- Leave the float in the drawer and put the deposit amount in the deposit bag.
- The next time the register is used, the Open Day screen appears for the new opening count.
Related Setup
The processes in this guide depend on the settings below. They are set up by an administrator in Backoffice and the Flax Enterprise Configuration app. See the Flax Enterprise Configuration guides for details.
- Cash denominations shown on Open Day and Close Day
- Cash In / Cash Out reasons
- Close Day variance reasons and whether a note is required
- Payment types and card types available on the register
- Payment terminal integration (integrated vs standalone)
- X-Report / Z-Report contents and print format